Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
reset mac-authen statistics
Usage Guidelines
The reset mac-authen statistics command is used in the following scenarios:
- Re-deploy services. After the statistics are cleared, collect the MAC address authentication statistics again, and run the display mac-authen command to check whether the authentication function is normal.
- Rectify a fault. After the fault is rectified, run the reset mac-authen statistics command to clear statistics, collect MAC address authentication statistics again, and run the display mac-authen command to check the authentication result. If the authentication is successful, the fault is rectified.
Related Topics
