Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
nat log binary-log host
Function
The nat log binary-log host command sets parameters of a binary NAT session log server, including the IP addresses and port numbers of the binary log server and the peer device communicating with the log server.
The undo nat log binary-log host command deletes the parameter settings of a binary NAT session log server.
By default, no binary NAT session log server is configured.
Format
nat log binary-log host host-ip-address host-port source source-ip-address source-port
undo nat log binary-log host
Parameters
Parameter |
Description |
Value |
|---|---|---|
host-ip-address host-port |
Specifies the IP address and port number of the NAT session log server. |
|
source source-ip-address source-port |
Specifies the IP address and port number of the peer device that sends logs to the log server. |
|
