jumboframe enable
Function
The jumboframe enable command sets the maximum frame length allowed by an Ethernet interface.
The undo jumboframe enable command restores the default maximum frame length allowed by an Ethernet interface.
By default, the maximum frame length allowed by an Ethernet interface is 9216 bytes.
The AC6800V does not support this function.
Usage Guidelines
Usage Scenario
An interface limits the length of frames that it can process. If the length of a received frame exceeds the maximum length allowed by the interface, the interface discards the frame. The jumboframe enable command sets the maximum frame length allowed by an interface.
Precautions
If you run the jumboframe enable command multiple times in the same interface view, only the latest configuration takes effect.
When an interface is enabled to allow jumbo frames but the maximum length of jumbo frames is not set, the interface allows jumbo frames of up to 9216 bytes.
