igmp global limit
Function
The igmp global limit command sets the maximum number of IGMP entries that can be created on the entire wireless access controller.
The undo igmp global limit command deletes the configured maximum number of IGMP entries.
By default, a maximum number of 256 IGMP entries can be created on the entire wireless access controller.
Parameters
| Parameter | Description | Value |
|---|---|---|
| number | Specifies the maximum number of IGMP entries that can be created on the entire wireless access controller. | The value is an integer that ranges from 1 to 256. |
Usage Guidelines
Usage Scenario
When the number of IGMP entries reaches the limit, the system does not create any IGMP entries. To enable the wireless access controller to create new IGMP entries, useless entries or increase the limit. Alternatively, you can configure static IGMP entries.
Each (*, G) entry is counted as one entry.
Each (S, G) entry is counted as one entry.
Each (*, G) entry established with SSM mapping is counted as one entry.
Precautions
You can also run the limit (IGMP) command in the IGMP view to set the maximum number of IGMP group memberships in the system. If both the igmp global limit and limit (IGMP) commands are run, the smaller value takes effect.
