Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display bgp multicast network
Function
The display bgp multicast network command displays the routes to be advertised by MBGP through the network command.
Usage Guidelines
This command is used to display all the configurations
of the network command in the IPv4 multicast address
family view. Routes can be imported and then advertised by MBGP only
when the route prefix satisfies the following conditions:
It is specified in the network command
It already exists in the IP routing table.
It is active.
Related Topics
