Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display network status
Parameters
| Parameter | Description | Value |
|---|---|---|
| all | Displays all the network information. | - |
| tcp | Displays TCP. | - |
| udp | Displays UDP. | - |
| port port-number | Specifies the number of an interface. | The value is an integer ranging from 1 to 65535. |
Usage Guidelines
The display network status command is used to check the network status, such as the running interfaces and services on the network. For example, when you find that an interface is being used by an unknown module during a security scan, run the command to check out the module.
Example
# Display the IPv4 RawIP connection status.
<AC6605> display network status all
Proto Task/SockId Local Addr&Port Foreign Addr&Port State TCP VTYD/1 0.0.0.0:23 0.0.0.0:0 Listening TCP VTYD/3 10.23.23.1:23 10.23.23.201:4332 Established TCP6 VTYD/2 ::->23 ::->0 Listening UDP NTPT/1 0.0.0.0:123 0.0.0.0:0 UDP AGNT/1 0.0.0.0:161 0.0.0.0:0 UDP RDS /1 0.0.0.0:1812 0.0.0.0:0 UDP WEB /1 0.0.0.0:2000 0.0.0.0:0 UDP L2_P/1 0.0.0.0:40000 0.0.0.0:0 UDP NAP /1 0.0.0.0:53535 0.0.0.0:0 UDP6 NTPT/2 ::->123 ::->0 UDP6 AGT6/1 ::->161 ::->0
