display arp static
Example
<AC6605> display arp static IP ADDRESS MAC ADDRESS EXPIRE(M) TYPE INTERFACE VPN-INSTANCE VLAN/CEVLAN PVC ------------------------------------------------------------------------------ 172.16.1.1 0efc-0505-86e3 S-- 10/- 192.168.0.1 0e00-fc01-0000 S-- 10.0.0.1 aa00-fcc0-1200 S-- 3/- ------------------------------------------------------------------------------ Total:3 Dynamic:0 Static:3 Interface:0
Item |
Description |
|---|---|
IP ADDRESS |
IP address in the ARP entry. |
MAC ADDRESS |
MAC address in the ARP entry. |
EXPIRE(M) |
Remaining lifetime of ARP entries, in minutes. |
TYPE |
ARP entry type and slot ID of the LPU that obtains the entry. The entry type contains 3 bits. The first bit can be any of the following:
NOTE:
The third bit indicates the slot ID of the LPU that obtains the entry.If the entry is not reported to the routing module, this field displays "-". For the ARP entry with the type as "I", this flag bit does not exist. NOTE:
For the ARP entry with the type as "I" or "S", this field displays "-". |
VPN-INSTANCE |
Name of the VPN instance to which the ARP entry belongs. |
INTERFACE |
Type and number of the interface that has learnt ARP entries. |
VLAN/CEVLAN |
ID of the VLAN to which the ARP entry belongs. The value is set using the vlan command. |
PVC |
Interface where the PVC exists and the corresponding VPI/VCI. |
Total |
Total number of ARP entries in the ARP mapping table. |
Dynamic |
Number of dynamic ARP entries in the ARP mapping table. |
Static |
Number of static ARP entries in the ARP mapping table. |
Interface |
Number of ARP entries in the ARP mapping table on the local interface. |
