Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ac-list (AP provisioning view)
Parameters
| Parameter | Description | Value |
|---|---|---|
| ipv4-address | Specifies the IPv4 address of an AC. | The value is in dotted decimal notation. |
Usage Guidelines
Usage Scenario
You can run this command to configure an AC IPv4 address list for APs. After this list is configured, the APs can unicast a Discovery Request packet to discover an AC when they go online using IPv4 addresses.
Follow-up Procedure
Run the commit command to deliver configuration to APs and restart the APs to make the configuration take effect.
