Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display snmp-agent trap feature-name pm all
Function
The display snmp-agent trap feature-name pm all command displays the status of all traps related to the PM module.
Usage Guidelines
You can use this command to check the status of all traps related to the PM module. These traps can be enabled or disabled using the snmp-agent trap enable feature-name pm command.
Example
# Display the status of all traps related to the PM module.
<AC6605>display snmp-agent trap feature-name pm all
------------------------------------------------------------------------------
Feature name: PM
Trap number : 2
------------------------------------------------------------------------------
Trap name Default switch status Current switch status
hwPMStatisticsTaskThresholdTriggerAlarm
on on
hwPMStatisticsTaskThresholdClearAlarm
on on
Table 26-33 Description of the display snmp-agent trap feature-name
pm all command output
Item |
Description |
|---|---|
Feature name |
Name of a module to which a trap message belongs. |
Trap number |
Number of trap messages. |
Trap name |
Name of a trap. |
Default switch status |
Whether the trap function is enabled by default:
|
Current switch status |
Whether the trap function is enabled currently:
|
Related Topics
