Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sta-offline-delay aging-time
Usage Guidelines
Usage Scenario
After the STA offline delay function is enabled, STAs can go offline and online again in the aging time without being authenticated, reducing the load on the authentication server. You can run the sta-offline-delay aging-time command to set the aging time.
Set the aging time for STA offline delay based on the network requirements and device performance. A long aging time causes the STA offline delay function to occupy many resources, affecting new STA access. A short aging time cannot achieve a noticeable effect in releasing the load on the authentication server.
Prerequisites
The STA offline delay function has been enabled using the sta-offline-delay enable command.
