Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display station neighbor
Parameters
| Parameter | Description | Value |
|---|---|---|
| sta-mac mac-address | Specifies the MAC address of a STA. |
The MAC address must exist. |
Usage Guidelines
You can run this command to check the neighbor list of the STA with a specified MAC address.
Example
# Display the neighbor list of the STA with a specified MAC address.
<AC6605> display station neighbor sta-mac d022-be5e-021f
--------------------------------------------------------------------------------------------------------------------------------
Device MAC Device ID Device Name Radio ID Probe info(RSSI/HH:MM:SS) 11k info[RCPI/RSNI/HH:MM:SS]
--------------------------------------------------------------------------------------------------------------------------------
1047-80ab-c9a0 5 AP5 1 -48/16:28:24 205/45/16:28:24
--------------------------------------------------------------------------------------------------------------------------------
Total neighbors: 1, total records: 1
System Response
Table 9-12 Description of the display station neighbor command output
Item |
Description |
|---|---|
| Device MAC | MAC address of a neighboring device. |
| Device ID | ID of a neighboring device. |
| Device Name | Name of a neighboring device. |
| Radio ID | Radio ID of a neighboring device. |
| Probe info(RSSI/HH :MM:SS) | Probe information about the STA, including the RSSI and timestamp. |
| 11k info[RCPI/RSNI/HH:MM:SS] | 802.11k information about the STA, including the Received Channel Power Indicator, Received Signal-to-Noise Indication, and timestamp. NOTE:
If the STA does not support 802.11k, this parameter is displayed as "-". |
