Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
smart-antenna { enable | disable }
Function
The smart-antenna { enable | disable } command enables or disables the smart antenna function for an AP.
The undo smart-antenna command restores the smart antenna function of an AP to the default state.
By default, the smart antenna function is disabled for APs but enabled for the AP2051DN, AP2051DN-E, R251D, R251D-E, AP4050DE-M, AP4050DE-M-S, AP4050DE-B-S, AP3050DE, AP5510-W-GP, and AP2051DN-S.
