Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
user-interface vty screen-length
Format
user-interface vty ui-number screen-length screen-length
undo user-interface vty ui-number screen-length
Parameters
| Parameter | Description | Value |
|---|---|---|
| ui-number | Specifies the VTY user interface number. | The value is an integer that ranges from 0 to 4. |
| screen-length | Specifies the number of lines displayed on a terminal screen. | The value is an integer that ranges from 0 to 512. The value 0 indicates that all command output is displayed on one screen. |
Usage Guidelines
If you run a command and its output is displayed in more lines than you can see on one screen, you can set a small number of lines displayed on each screen.
In most cases, you do not need to change the number of lines displayed on each screen. Setting the number of lines to 0 is not recommended. The configuration takes effect after you log in to the system again.
