display users
Parameters
| Parameter | Description | Value |
|---|---|---|
| all | Displays information about all users who log in to the device through user interfaces, including information about user interfaces that are not used. If the all parameter is not used, the command displays only information about user interfaces that have been connected. | - |
Usage Guidelines
You can run this command to view information about users who are connected to the device. The information includes the user name, IP address, and authentication and authorization information.
Lower-level users cannot gain access to information about users of higher levels.
Example
# Run the display users command to view information about users who log in to the device through the user interface.
<AC6605> display users
User-Intf Delay Type Network Address AuthenStatus AuthorcmdFlag
+ 130 VTY 1 00:00:00 TEL 10.164.6.15 pass
Username : user2
Network Address : 172.16.1.1
Item |
Description |
|---|---|
+ |
Terminal line in use. |
User-Intf |
The number in the first column indicates the absolute number of the user interface, and the number in the second column indicates the relative number of the user interface. |
Delay |
Interval from the user's latest input to the current time, in seconds. |
Type |
Connection type.
|
Network Address |
Indicates the initial connection location. |
Username |
User name for logging in to the device. If the user name is not specified, Unspecified is displayed. |
AuthenStatus |
Whether the authentication succeeds. |
AuthorcmdFlag |
Command line authorization status. |
