Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
type service-navi
Usage Guidelines
Usage Scenario
Two AC types are defined: local AC and Navi AC.
You need to perform the following operations on
a local AC:
- Run the navi-ac ac-id command to specify the AC ID and IP address for a Navi AC.
- Run the type service-navi command in the specified VAP profile view to set the VAP type to Navi AC.
Precautions
Configure the Navi AC in advance.
The service data forwarding mode can be set only to tunnel forwarding.
The parameter navi-wlan-id in this command must be set to the same as the parameter wlan-id in the vap-profile profile-name wlan wlan-id command.
Related Topics
