nd snooping alarm binding-table check threshold
Function
The nd snooping alarm binding-table check threshold command configures the alarm threshold for the number of ND snooping-discarded packets.
The undo nd snooping alarm binding-table check threshold command restores the default alarm threshold.
By default, the global alarm threshold for the number of ND snooping-discarded packets is 100, and the alarm threshold for the number of ND snooping-discarded packets on an interface is the value configured in the system view.
Format
nd snooping alarm binding-table check threshold threshold
undo nd snooping alarm binding-table check threshold
Parameters
Parameter | Description | Value |
---|---|---|
threshold | Specifies the alarm threshold for the number of ND snooping-discarded packets. | The value is an integer that ranges from 1 to 1000. |
Usage Guidelines
Usage Scenario
After the alarm function for checking packets against the ND snooping binding table is enabled using the nd snooping alarm binding-table check enable command, you can run the nd snooping alarm binding-table check threshold command to configure the alarm threshold for the number of ND snooping-discarded packets.
Prerequisites
ND snooping has been enabled on the device using the nd snooping enable command.
Precautions
If this command is run in the system view, it takes effect on all the interfaces of the device.