Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
anti-attack fragment car
Function
The anti-attack fragment car command sets the rate limit of packet fragments.
The undo anti-attack fragment car command restores the rate limit of packet fragments.
By default, the rate limit of packet fragments is 155000000 bit/s.
Usage Guidelines
Usage Scenario
After defense against packet fragment attacks is enabled, run the anti-attack fragment car command to set the rate limit of packet fragments. If the rate of received packet fragments exceeds the rate limit, the device discards excess packet fragments to ensure that the device CPU works properly.
Prerequisites
Defense against packet fragment attacks has been enabled using the anti-attack fragment enable command.
Related Topics
