Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
poe priority (AP wired port link profile view)
Usage Guidelines
Usage Scenario
When the output power of a device is insufficient, the device provides power for the interfaces of the higher power supply priorities first and cuts off power of the interfaces of the lower power supply priorities. If all the interfaces are of the same priority, the power supply priority of the interface with a smaller interface number is higher.
Precautions
This command takes effect only on the AP2051DN-E, R251D-E, AP8082DN, AP8182DN, AP4050DN-E, AP4050DN-HD, AP7050DN-E, AP2050DN-E, R250D-E, AD9431DN-24X, AD9430DN-24, and AD9430DN-12.
Related Topics
