Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display sync-configuration status
Function
The display sync-configuration status command displays the status of the peer AC in a wireless configuration synchronization scenario.
Usage Guidelines
After wireless configuration synchronization is configured in VRRP HSB or dual-link HSB scenarios, you can run the display sync-configuration status command to check the status of the peer AC.
Example
# Display the peer AC's status in a wireless configuration synchronization scenario.
<AC6605> display sync-configuration status Controller role:Master/Backup/Local ---------------------------------------------------------------------------- Controller IP Role Device Type Version Status Last synced ---------------------------------------------------------------------------- 192.168.10.1 Master - - down - ---------------------------------------------------------------------------- Total: 1
Table 21-10 Description of the display sync-configuration status command output
| Parameter | Description |
|---|---|
Controller IP |
IP address of the peer AC. |
Role |
Role of the peer AC. |
Device Type |
Type of the peer AC. |
Version |
Version of the peer AC. |
Status |
Status of the peer AC.
|
| Last synced | Last time when configurations are synchronized. |
