Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
cmp-request authentication-cert
Function
The cmp-request authentication-cert command configures the certificate for identity authentication in the request through CMPv2.
The undo cmp-request authentication-cert command deletes the certificate for identity authentication in the request through CMPv2.
By default, no certificate for identity authentication in the request through CMPv2 is configured.
Parameters
| Parameter | Description | Value |
|---|---|---|
| cert-name | Specifies the name of a certificate file. | The value must be an existing certificate file name. |
Usage Guidelines
Usage Scenario
Run this command to configure the certificate for identity authentication if you need to apply for a certificate through CMPv2. For different requests through CMPv2, the required certificates are as follows:
- For Initialization Requests (IR), the required certificate is an external identity certificate.
- For certification requests (CR), the required certificate is the one that the CA has already issued to the device.
- For the key update requests (KUR), the required certificate is the one that the CA has already issued to the device and is also the one to be updated.
Prerequisites
An identity authentication in the request through CMPv2 exists.
Related Topics
