Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
name (user-defined IPS signature view)
Function
The name command sets the name of a user-defined signature.
The undo name command deletes the name of a user-defined signature.
Parameters
| Parameter | Description | Value |
|---|---|---|
| name | Specifies the name of a user-defined signature. |
The value is a case-sensitive string. If the name does not contain any spaces, the length is 1 to 96 characters. If the name contains spaces, the length is 3 to 98 characters and the name must be enclosed with double quotation marks (""), for example, "user for test". The name cannot contain any question marks (?), commas (,), quotation marks ("), or hyphens (-). |
