Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
rule name (user-defined IPS signature view)
Function
The rule name command creates a user-defined signature rule with the specified name.
The undo rule command deletes all user-defined signature rules or the specified user-defined signature rule.
Parameters
| Parameter | Description | Value |
|---|---|---|
| name | Specifies the name of a user-defined signature rule. |
The value is a case-sensitive string. If the name does not contain any spaces, the value contains 1 to 32 characters. If the name contains spaces, the value contains 3 to 34 characters, and you must enclose the name with double quotation marks (""), for example, "user for test". The name cannot contain any question marks (?), commas (,), quotation marks ("), or hyphens (-). |
| all | Indicates all user-defined signature rules. |
- |
