Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display tftp-client
Function
The display tftp-client command displays the source IP address configured for the TFTP client.
Usage Guidelines
You can run the display tftp client command to query source IP address of the TFTP client. The default source IP address is 0.0.0.0 if tftp client-source is not configured.
Example
# Display the source IP address configured for the TFTP client.
<AC6605> display tftp-client Info: The source address of TFTP client is 1.1.1.1.
Table 2-32 Description of the display tftp-client command output
Parameter |
Description |
|---|---|
| Info: The source address of TFTP client is 1.1.1.1. | 1.1.1.1 is the source IP address of the TFTP client. You can run the tftp client-source command to configure the source IP address for the TFTP client. If the IP address is configured for the source port, the message "The source interface of TFTP client is LoopBack0" is displayed. |
