Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ipsec statistics route
Usage Guidelines
In an IPSec route injection scenario, you can run the display ipsec statistics route command to view IPSec route injection statistics for fault location.
Example
# Display IPSec route injection statistics.
<AC6605> display ipsec statistics route
IPSec route statistics information:
Route add send:1 receive:1
Route del send:0 receive:0
Route syn send:674 receive:674
Route syn round send:674 receive:674
Route syn add :0 del :0
Route send to route module add :2 del :1
Route send to ipsec module add :1 del :0
Route msg ipc send error :0
Route msg process error :0
Route add:
dest addr equal with peer addr :0
add no memery :0
same route same slot :0
same route diff slot or interface down :1
cpu not exist :0
vrf invalid :0
Route del:
route not exist :0
not delete state :0
same route send by other slot :0
HA data
Route HA send num :675
Route HA receive num :0
Route HA send error num :0
Table 20-42 Description of the display ipsec statistics route command output
