No relevant resource is found in the selected language.
Enterprise
Worldwide
Huawei Global - English
Support Documentation
WLAN AC V200R010C00 Command Reference
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
coordinate

coordinate

Function

The coordinate command sets the latitude and longitude of an AP.

The undo coordinate command restores the latitude and longitude of an AP to empty.

By default, no latitude or longitude is configured for an AP.

Format

coordinate longitude { e | w } longitude-value latitude { s | n } latitude-value

undo coordinate

Parameters

Parameter Description Value
longitude e longitude-value

Specifies the east longitude value of an AP.
The value supports two formats: degrees, minutes, and seconds (DMS) and decimal degrees (DD).
  • The DMS format is XXX-XX-XX. XXX ranges from 0 to 180, and XX ranges from 0 to 59.
  • The DD format is XXX.XXXXXXXXX. XXX ranges from 0 to 180, and XXXXXXXXX is a decimal supporting a maximum of 9 digits.
longitude w longitude-value

Specifies the west longitude value of an AP.
The value supports two formats: DMS and DD.
  • The DMS format is XXX-XX-XX. XXX ranges from 0 to 180, and XX ranges from 0 to 59.
  • The DD format is XXX.XXXXXXXXX. XXX ranges from 0 to 180, and XXXXXXXXX is a decimal supporting a maximum of 9 digits.
latitude s latitude-value

Specifies the south longitude value of an AP.
The value supports two formats: DMS and DD.
  • The DMS format is XX-XX-XX. The first XX ranges from 0 to 90, and the other XXs range from 0 to 59.
  • The DD format is XX.XXXXXXXXX. XX ranges from 0 to 90, and XXXXXXXXX is a decimal supporting a maximum of 9 digits.
latitude n latitude-value

Specifies the north longitude value of an AP.
The value supports two formats: DMS and DD.
  • The DMS format is XX-XX-XX. The first XX ranges from 0 to 90, and the other XXs range from 0 to 59.
  • The DD format is XX.XXXXXXXXX. XX ranges from 0 to 90, and XXXXXXXXX is a decimal supporting a maximum of 9 digits.

Views

AP view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

You can run this command to set the longitude and latitude of an AP for easily locating it.

Example

# Set the longitude and latitude of an AP to 114.3435°E and 14.3435°S, respectively.

<AC6605> system-view
[AC6605] wlan
[AC6605-wlan-view] ap-id 0
[AC6605-wlan-ap-0] coordinate longitude e 114.3435 latitude s 14.3435
Related Topics
Translation
简体中文
Download
Updated: 2021-02-27

Document ID: EDOC1100064351

Views: 3175155

Downloads: 595

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next
Huawei e+ App Huawei e+

Copyright © 2022 Huawei Technologies Co., Ltd. All rights reserved.

You are going to visit :