Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display stp vlan
Function
The display stp vlan command displays the STP status on an interface added to a specified VLAN.
Parameters
| Parameter | Description | Value |
|---|---|---|
| vlan-id | Displays the STP status on an interface added to a specified VLAN. |
The value is an integer ranging from 1 to 4094. |
Usage Guidelines
After an interface is added to a VLAN, the display stp vlan command can be used to the display the STP status on the interface. In this case, the mapping between VLANs and instances does not need to be concerned with.
