Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
bfd all-interfaces enable(RIP)
Function
The bfd all-interfaces enable command enables BFD on all the interfaces in a RIP process.
The undo bfd all-interfaces enable command disables BFD on all the interfaces in a RIP process.
By default, BFD is disabled in a RIP process.
Usage Guidelines
If BFD parameters are configured, but the bfd all-interfaces enable command is not configured, BFD sessions cannot be established.
- To enable BFD on all the interfaces, run the bfd command in the system view to enable global BFD first.
The BFD priority on an interface is higher than the BFD priority on a RIP process.
If the rip bfd block command is configured on an interface, the bfd all-interfaces enable command cannot be used to enable BFD on the interface.
Related Topics
