Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
respond-only enable
Function
The respond-only enable command configures the local end as the IPSec responder that does not initiate IPSec negotiation.
The undo respond-only enable command cancels the configuration.
By default, if the local end establishes an IPSec tunnel using the ISAKMP IPSec policy, the local end initiates IPSec negotiation.
