Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
pim dm
Function
The pim dm command enables PIM-DM on an interface.
The undo pim dm command restores the default configuration.
By default, PIM-DM is disabled on an interface.
Usage Guidelines
Usage Scenario
After PIM-DM is enabled on an interface, the wireless access controller can set up the PIM neighbor relationship with the neighboring device. The wireless access controller then can process protocol packets received from PIM neighbors.
Prerequisites
IP multicast routing has been enabled using the multicast routing-enable command.
Precautions
PIM-DM and PIM-SM cannot be enabled simultaneously on the device.
If PIM-DM and IGMP need to be enabled on the same interface, enable PIM-DM, and then enable IGMP.
Related Topics
