mdns source ip
Function
The mdns source ip command specifies the source IP address in outgoing mDNS request packets when the device is configured to periodically discover services.
The undo mdns source ip command deletes the configured source IP address.
By default, the source IP address is not configured.
Usage Guidelines
When the device is configured to periodically discover services, run the mdns source ip command to specify the source IP address in outgoing mDNS request packets. The device encapsulates its source IP address into outgoing mDNS request packets so that it can receive response packets from service provisioning devices. If an IP address is assigned to the VLANIF interface corresponding to the VLAN where the device periodically discovers services, the device encapsulates the IP address of the VLANIF interface into outgoing mDNS request packets. In this case, you do not need to specify the source IP address in outgoing mDNS request packets.
