local-eap-server configuration reload
Function
The local-eap-server configuration reload command reloads configurations of the local EAP server template.
Usage Guidelines
The modifications made on the parameters of the EAP server template do not take effect immediately. To make the modifications take effect, you must run the local-eap-server configuration reload command to reload the configurations of the local EAP server template. (The modifications include those made using the following commands:)
- local-eap-server authentication method { eap-peap | eap-tls | eap-ttls } *
- local-eap-server authentication eap-phase-one enable
- local-eap-server authentication certificate ca format pem filename filename
- local-eap-server authentication certificate local format { der | pem } filename filename
- local-eap-server authentication private-key format { pem | pkcs12 } filename filename [ password password ] or local-eap-server authentication private-key format der filename filename
- local-eap-server authentication eap-server-template template-name
If the information of a local user that uses local EAP authentication is modified, you must also run the local-eap-server configuration reload command to reload the configurations of the local EAP server template for the modifications to take effect. (The modifications include those made using the following commands:)
- local-user user-name password or local-user user-name password { cipher | irreversible-cipher } password
- local-user user-name service-type 8021x
- local-user user-name time-range time-name
- local-aaa-user wrong-password retry-interval retry-interval retry-time retry-time block-time block-time
- local-user user-name state { active | block }
- local-user user-name expire-date expire-date [ expire-hour expire-hour ]
