Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display rip database
Function
The display rip database command displays all the active routes in the RIP database. These routes are sent in RIP Update packets.
Parameters
| Parameter | Description | Value |
|---|---|---|
| process-id | Specifies the ID of a RIP process. | The value is an integer ranging from 1 to 65535. |
| verbose | Displays detailed information about the routes in the RIP database. | - |
Example
# Display the RIP database.
<AC6605> display rip 100 database
---------------------------------------------------
Advertisement State : [A] - Advertised
[I] - Not Advertised/Withdraw
---------------------------------------------------
10.0.0.0/8, cost 5, ClassfulSumm
10.1.1.1/32, cost 5, [A], nexthop 10.1.2.1
172.16.0.0/16, cost 7, ClassfulSumm
172.16.1.1/32, cost 7, [A], Imported
Table 6-173 Description of the display rip database command output
Item |
Description |
|---|---|
Advertisement State |
Route status.
|
ClassfulSumm |
Classful route summarization. |
Imported |
Routes imported from other routing protocols. |
Rip-interface |
Routes learned on the RIP interface. |
