calibrate manual startup
Parameters
Parameter |
Description |
Value |
|---|---|---|
ap-group group-name |
Specifies an AP group. NOTE:
A maximum of four AP groups can be specified. |
The AP group must exist. |
ap-id ap-list |
Specifies AP IDs in a batch. |
The value is a string of 1 to 255 characters. When multiple APs are selected, use commas (,) or hyphens (-) to separate AP IDs. For example, 5,8,10-13,20 indicates the list of APs with IDs 5, 8, 10, 11, 12, 13, and 20. |
Usage Guidelines
To implement radio calibration instantly, you can run the calibrate enable { auto [ interval interval-value [ start-time start-time ] ] | manual | schedule time time-value } command to enable radio calibration and then run the calibrate manual startup command to manually trigger radio calibration.
You can select an AP group or list to implement radio calibration for specified APs.
