Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
security-profile (Mesh profile view)
Usage Guidelines
Usage Scenario
Before a Mesh profile is applied to an AP radio to establish Mesh links, the Mesh profile must have a security profile bound to ensure Mesh link security.
Precautions
After a security profile is bound to a Mesh profile, the authentication policy and encryption mode in the security profile cannot be changed, but the authentication key can be changed.
A Mesh profile can only have one security profile bound. If you run the command multiple times in the same Mesh profile view, the latest configuration overwrites the old one.
Example
# Create the security profile sec and set the security policy to WPA2+PSK+AES. Create the Mesh profile test and bind the security profile to the Mesh profile.
<AC6605> system-view [AC6605] wlan [AC6605-wlan-view] security-profile name sec [AC6605-wlan-sec-prof-sec] security wpa2 psk pass-phrase huawei@123 aes [AC6605-wlan-sec-prof-sec] quit [AC6605-wlan-view] mesh-profile name test [AC6605-wlan-mesh-prof-test] security-profile sec Warning: This action may cause service interruption. Continue?[Y/N]y
