igmp-snooping group-bandwidth (system view)
Format
igmp-snooping group-bandwidth start-group-address start-group-address end-group-address end-group-address bandwidth bandwidth-value
undo igmp-snooping group-bandwidth start-group-address start-group-address end-group-address end-group-address
Parameters
| Parameter | Description | Value |
|---|---|---|
start-group-address start-group-address |
Specifies the start multicast group address. |
The value is in dotted decimal notation. |
end-group-address end-group-address |
Specifies the end multicast group address. |
The value is in dotted decimal notation. |
bandwidth bandwidth-value |
Specifies the bandwidth of multicast groups. |
The value is an integer that ranges from 1 to 100000, in kbps. |
Usage Guidelines
Usage Scenario
You can configure the bandwidth of multicast groups in a system view according to the actual bandwidth of a multicast program. This configuration takes effect globally on an AC. When users request to order this multicast program, the AC collects statistics on the multicast bandwidth of global multicast groups according to the configured global bandwidth, and compares the current bandwidth with the configured maximum bandwidth to determine whether to allow users to order this multicast program.
Precautions
You can configure the bandwidth for a maximum of 32 multicast group address segments. Addresses in one address segment must be different from those in another address segment. The configured address segments must contain valid multicast program addresses.
