mobility-server
Function
The mobility-server command specifies a mobility server for an AC.
The undo mobility-server command deletes a mobility server.
By default, no mobility server is specified for an AC.
Usage Guidelines
Usage Scenario
In inter-AC roaming scenarios, you need to add the involved ACs into a mobility group. The mobility server can manage the ACs in the group in a centralized manner, but the ACs must be manually added on the mobility server.
You can run the mobility-server command to specify a mobility server for an AC, and then configurations on the mobility server can be delivered to the AC.
Precautions
Each AC can have only one mobility server specified. To specify a new mobility server for an AC, run the undo mobility-server command to delete the existing mobility server of the AC.
Example
# Specify the mobility server with the IP address 192.168.10.1 for the AC.
<AC6605> system-view [AC6605] wlan [AC6605-wlan-view] mobility-server ip-address 192.168.10.1
# Delete a mobility server.
<AC6605> system-view [AC6605] wlan [AC6605-wlan-view] undo mobility-server Warning: The device will be out of management by the mobility server. Continue?[Y/N]:y
