Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ftp-client
Function
The display ftp-client command displays the source IP address configured for the FTP client.
Example
# Display the source IP address of the FTP client.
<AC6605> display ftp-client Info: The source IP address of FTP client is 10.1.1.1.
Table 2-30 Description of the display ftp-client command output
Parameter |
Description |
|---|---|
| Info: The source IP address of FTP client is 10.1.1.1. | 10.1.1.1 is the source IP address of the FTP client. You can run the ftp client-source command to configure the source IP address. If the IP address is configured for the source port, the message "The source interface of FTP client is LoopBack0" is displayed. |
