Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
reset isis peer
Parameters
| Parameter | Description | Value |
|---|---|---|
| system-id | Specifies the system ID of an IS-IS neighbor. | The value is 6 bytes in length and in XXXX.XXXX.XXXX format. |
| process-id | Specifies the IS-IS process ID for which the neighbor relationship needs to be reset. | The value is an integer that ranges from 1 to 65535. |
Usage Guidelines
The reset isis peer command is used when a device needs to re-establish the neighbor relationship with a specified neighbor.
Exercise caution when using the reset isis peer command. This command will re-establish neighbor relationships with a specified neighbor, which may result in route flapping.
