Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
description (tunnel interface view)
Function
The description command sets the description of the current tunnel interface.
The undo description command deletes the description of the current tunnel interface.
By default, the description of a tunnel interface is "HUAWEI, AC Series, Tunnel interface-number Interface".
Parameters
| Parameter | Description | Value |
|---|---|---|
| text | Specifies the description of a tunnel interface. | The value is a string of 1 to 242 case-sensitive characters, with spaces supported. |
Usage Guidelines
After using the interface tunnel command to create a tunnel interface, you can run the description command to configure a description of the tunnel interface to facilitate later query.
To check the description of a tunnel interface, run the display this interface command in the tunnel interface view or the display interface tunnel command.
Example
# Configure the description of Tunnel 0/0/1.
<AC6605> system-view [AC6605] interface tunnel 0/0/1 [AC6605-Tunnel0/0/1] description This is a tunnel from 10.1.1.1 to 10.2.2.2
#
Delete the description of Tunnel 0/0/1.
<AC6605> system-view [AC6605] interface tunnel 0/0/1 [AC6605-Tunnel0/0/1] undo description
