Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
admin-vrrp vrid
Function
The admin-vrrp vrid command specifies an mVRRP group.
The undo admin-vrrp vrid command deletes the specified mVRRP group.
By default, no mVRRP group is specified.
Usage Guidelines
Usage Scenario
VRRP groups, VRRP-disabled
interfaces, or PWs can be bound to an mVRRP group. After the
bindings, the mVRRP group determines the master and backup VRRP status
of the bound objects. mVRRP is used when multiple VRRP groups coexist,
decreasing VRRP Advertisement packets to be sent and minimizing network
bandwidth consumption. mVRRP is also used to determine the active
and standby status of links along which a user device is dual-homed
to a network.![]()
mVRRP provides the following functions:
An mVRRP group used as the gateway can process both VRRP packets and service packets.
An mVRRP group that is not used as the gateway can only process VRRP packets.
Precautions
An mVRRP group cannot be bound to another mVRRP group.
