server
Function
The server command specifies the IP address, domain name, and port number of a third-party server on the AC.
The undo server command restores the default domain name and port number of a third-party server on the AC.
By default, a third-party server has the domain name gwapi.helianhealth.com, HTTP port number 80, and no IP address configured.
Parameters
| Parameter | Description | Value |
|---|---|---|
| ip ip | Specifies the IP address of a third-party server. |
The value is in dotted decimal notation. |
| domain domain | Specifies the domain name of a third-party server. |
The value is a string of 1 to 256 case-insensitive characters. |
| port port | Specifies the HTTP port number of a third-party server. |
The value is 80 or an integer that ranges from 1025 to 55535. |
Usage Guidelines
When an AC is connected to a third-party server, you can enable the third-party data collection function on the AC. The server command allows you to configure the IP address/domain name and port number for the third-party server on the AC. If you do not specify the port number, the default port number 80 is used.
