Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
card connect-type
Usage Guidelines
Usage Scenario
When an IoT card communicates with an AP through the serial interface, the communication rate between the IoT card and AP does not exceed the maximum baud rate of the serial interface, that is, 115200 bit/s. This connection type is applicable to scenarios without high traffic volume. When an IoT card communicates with an AP through an Ethernet interface, the communication rate of 10 Mbit/s is supported. This connection mode is applicable to electronic shelf label (ESL) scenarios.
Before using IoT cards of other vendors, contact the vendors to confirm the connection types supported by the cards.
Precautions
