Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
layer3-roam disable
Function
The layer3-roam disable command disables Layer 3 roaming.
The undo layer3-roam disable command cancels the configuration of disabling Layer 3 roaming.
By default, Layer 3 roaming is enabled on a device.
Usage Guidelines
Usage Scenario
You can run the layer3-roam disable command to disable the Layer 3 roaming function. After that, the APs will deny access from Layer 3 roaming STAs but allow their connected STAs to roam to other APs at Layer 3.
Example
# Disable Layer 3 roaming.
<AC6605> system-view [AC6605] wlan [AC6605-wlan-view] vap-profile name huawei [AC6605-wlan-vap-prof-huawei] layer3-roam disable
# Enable Layer 3 roaming.
<AC6605> system-view [AC6605] wlan [AC6605-wlan-view] vap-profile name huawei [AC6605-wlan-vap-prof-huawei] undo layer3-roam disable
