sta-load-balance dynamic steer-restrict restrict-time
Function
The sta-load-balance dynamic steer-restrict restrict-time command sets the duration with which non-target APs suppress association of STAs during migration of the STAs.
The undo sta-load-balance dynamic steer-restrict restrict-time command restores the default duration with which non-target APs suppress association of STAs during migration of the STAs.
By default, the duration with which non-target APs suppress association of STAs during migration of the STAs is 5 seconds.
Format
sta-load-balance dynamic steer-restrict restrict-time restrict-time
undo sta-load-balance dynamic steer-restrict restrict-time
Usage Guidelines
Usage Scenario
When a STA is triggered to migrate to a specified target AP, non-target APs will suppress association of the STA temporarily to improve the STA's migration success rate. You can run the sta-load-balance dynamic steer-restrict restrict-time command to set the duration with which non-target APs suppress association of STAs during migration of the STAs.
Precautions
You can set a larger value of this parameter to improve the STA migration success rate, which, however, may affect users' network experience.
The default value is applicable to mainstream STAs. You are advised to retain the default value. If users' service experience deteriorates due to STA migration, set a smaller value for this parameter.
This command is valid only in sta-number mode.
Example
# Set the duration with which non-target APs suppress association of STAs during migration of the STAs to 4 seconds in RRM profile default.
<AC6605> system-view [AC6605] wlan [AC6605-wlan-view] rrm-profile name default [AC6605-wlan-rrm-prof-default] sta-load-balance dynamic steer-restrict restrict-time 4
