Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
EFM Configuration Commands
ACU2 does not support EFM.
- display efm
- display efm link-event local
- display efm session
- display error-down recovery
- display snmp-agent trap feature-name efm all
- display snmp-agent trap feature-name error-down all
- display test-packet result
- efm enable
- efm error-code notification enable
- efm error-code period
- efm error-code threshold
- efm error-frame notification enable
- efm error-frame period
- efm error-frame threshold
- efm error-frame-second notification enable
- efm error-frame-second period
- efm error-frame-second threshold
- efm holdup-timer
- efm loopback
- efm loopback ignore-request
- efm mode
- efm packet max-size
- efm src-mac
- efm threshold-event trigger error-down
- efm timeout
- efm trigger error-down
- efm trigger if-down
- efm trigger mac-renew
- error-down auto-recovery
- snmp-agent trap enable feature-name efm
- snmp-agent trap enable feature-name error-down
- test-packet start
