Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
User Login Configuration Commands
- config lock
- config unlock interval
- display config lock
- display rsa local-key-pair public
- display rsa peer-public-key
- display ssh server
- display ssh user-information
- display telnet server status
- display telnet-client
- display ecc local-key-pair public
- display ecc peer-public-key
- ecc local-key-pair create
- ecc local-key-pair destroy
- ecc peer-public-key
- lock
- matched upper-view
- peer-public-key end
- public-key-code begin
- public-key-code end
- rsa local-key-pair create
- rsa local-key-pair destroy
- rsa peer-public-key
- send
- ssh client assign
- ssh client first-time enable
- ssh client key-exchange
- ssh client secure-algorithms hmac
- ssh client secure-algorithms cipher
- ssh server authentication-retries
- ssh server compatible-ssh1x enable
- ssh server key-exchange
- ssh server permit interface
- ssh server port
- ssh server rekey-interval
- ssh server secure-algorithms hmac
- ssh server secure-algorithms cipher
- ssh server timeout
- ssh user assign
- ssh user authentication-type
- stelnet
- stelnet ap
- stelnet server enable
- telnet
- telnet client-source
- telnet server permit interface
- telnet server port
- telnet server enable
