Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ike local-name
Function
The ike local-name command configures the local name for IKE negotiation.
The undo ike local-name command deletes the local name for IKE negotiation.
By default, no local name is configured for IKE negotiation.
Parameters
| Parameter | Description | Value |
|---|---|---|
| local-name | Specifies a local name for IKE negotiation. | The value is a string of 1 to 255 case-sensitive characters without question marks (?). |
Usage Guidelines
When identity authentication, If the ID type of an IKE peer is domain name, fully qualified domain name (FQDN), or USER-FQDN, the IKE peer uses the name for identity authentication. You can use the following methods to configure the local name:
The local name configured using the local-id command has a higher priority than that configured using the ike local-name command.
