Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
trunkport
Function
The trunkport command adds a member interface in the Eth-Trunk interface view.
The undo trunkport command deletes a member interface in the Eth-Trunk interface view.
By default, no member interface is added to an Eth-Trunk.Format
trunkport interface-type { interface-number1 [ to interface-number2 ] } &<1-16>
undo trunkport interface-type { interface-number1 [ to interface-number2 ] } &<1-16>
Parameters
Parameter |
Description |
Value |
|---|---|---|
interface-type interface-number1 [ to interface-number2 ] |
Specifies the interface type and number.
|
- |
