Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
join-prune triggered-message-cache disable (IPv4)
Function
The join-prune triggered-message-cache disable command disables the Join-Prune message package function.
The undo join-prune triggered-message-cache disable command enables the Join-Prune message package function.
By default, the Join-Prune message package function is enabled.
Usage Guidelines
Usage Scenario
The system performs more efficiently to send a cacheage of PIM Join-Prune messages than to send a large number of individual PIM Join-Prune messages. A device sends PIM Join-Prune messages in cacheages. To disable the cacheage function, run the join-prune triggered-message-cache disable command.
Prerequisites
IP multicast routing has been enabled using the multicast routing-enable command.
Precautions
This command is valid for PIM-SM and PIM-DM.
