Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display ap update schedule-task
Function
The display ap update schedule-task command displays information about scheduled AP upgrade tasks.
Usage Guidelines
You can use this command to view information about scheduled AP upgrade tasks, and run the undo ap update schedule-task { all | task-id task-id } command to delete the scheduled tasks that have been completed or are not needed.
Example
# View information about scheduled AP upgrade task.
<AC6605> display ap update schedule-task
-------------------------------------------------------------------------------------
Task-ID Task-State Start-Time Stop-Time AP-Type AP-Group
-------------------------------------------------------------------------------------
1 IDLE 2016/11/01 11:11 2017/01/01 11:12 54 -
-------------------------------------------------------------------------------------
Table 8-21 Description of the display ap update schedule-task command output
| Item | Description |
|---|---|
| Task-ID | ID of a scheduled AP upgrade task. |
| Task-State | Status of the scheduled AP upgrade task.
|
| Start-Time | Start time of the scheduled AP upgrade task. |
| Stop-Time | End time of the scheduled AP upgrade task. |
| AP-Type | Type of the APs to be upgraded. |
| AP-Group | AP group to which the APs to be upgraded belong. |
Related Topics
